Address: northwest corner of the intersection of yangfan road and weiyi road, high-tech zone, zibo city
In view of the power safety of the majority of users, the combined transformer of preventing electricity theft effectively prevents the hidden danger of electricity theft, and it has been used in numerous municipal projects. The combined transformer of preventing electricity theft of our company is very popular among users, and I will introduce this knowledge to you below.
To add preventing electricity-stolen combined transformer, and in preventing electricity-stolen combined transformer side closed by heat shrinkable sleeve, in order to prevent the short-circuit power at a terminal artificial, secondary loop using sheathed wire, watt-hour meter, a joint junction box installed in the password and the clink of totally enclosed table method such as contents, make the electric energy metering device in a closed state.
1. For some dedicated line users whose metering points are located on the side of users due to historical reasons, the metering points shall be moved to the property right demarcation point or substation according to law, and the combined transformer to prevent electricity theft shall be installed, so as to separate the metering circuit from other circuits and avoid power theft through intermediate links.
2. Special transformer users connected to "T" on 10 kV public line, especially private enterprises such as small steel mills, shale brick factories and township enterprises. Transfer the metering point to the upper and lower layer between the 10 kV public line and the user branch line, and install the metering device in accordance with the transformation scheme of electric energy metering device for high-voltage users. The meter box is installed on the pole, and a wireless meter reading device is installed in the meter box to make meter reading more convenient and fast. To steal electricity to bring a certain degree of difficulty and risk, so that the theft of electricity without opportunity.
3. For users whose metering point is located at the user side and whose metering mode is high power supply and low meter, change the metering mode to high power supply and high meter, and transfer the metering point to the incoming pole outside the distribution room or the high-voltage side of the transformer. The energy metering device shall be installed in accordance with the energy metering device transformation scheme of high-voltage users. So that the original laying in the underground cable from the front table into the table after the line, put an end to the low-voltage line is extremely chaotic, neither safe and make users steal electricity opportunities.
I believe you have read the detailed introduction of the combination transformer to prevent electric theft. Everybody must consult regular manufacturer well on the choice, lest cause unnecessary trouble.